USB Charger - 5V2.4A

Products > USB-C Charger > USB Charger - 5V2.4A

USB Charger - 5V2.4A

Min.Order Quantity: 10K PCS
Port: ShenZhen
Payment Terms: T/T,Western Union,PayPal
Porudct time: 10 to 15 working days or depending on the order
Package: Carton
2 years warranty

Contact purchase

shared：

Product details

SPECIFICATION
Output	SPEC MODEL NO.	VP-0500800	VP-0501000	VP-0501200	VP-0501500	VP-0502000	VP-0502100	VP-0502400
	DC VOLTAGE	5V	5V	5V	5V	5V	5V	5V
	RATED CURRENT	800mA	1A	1.2mA	1.5A	2A	2.1A	2.4A
	CURRENT RANGE	0-0.8A	0-1.0A	0-1.2A	0-1.5A	0-2A	0-2.1A	0-2.4A
	RATED POWER(MAX)	12W	12W	12W	12W	12W	12W	12W
	RIPPLE & NOISE（MAX）	1%	1%	1%	1%	1%	1%	1%
	VOLTAGE TOLERANCE	±5%	±5%	±5%	±5%	±5%	±5%	±5%
	LINE REGULATION	1%	1%	1%	1%	1%	1%	1%
	LOAD REGULATION	±5%	±5%	±5%	±5%	±5%	±5%	±5%
	SETUP,RISE,HOLD UP TIME	300ms, 50ms, 12ms/230VAC 1300ms, 50ms, 12ms/115VAC at full load
Input	VOLTAGE RANGE	100-240V AC
	FREQUENCY	50/60HZ
	EFFICIENCY	81.5%	83.0%	83.5%	83.0%	84.0%	85.0%	85.5%
	AC CURRENT	0.5A / 115VAC 0.3A / 230VAC
	INRUSH CURRENT (max.)	COLD START 30A / 115VAC 60A / 230VAC
	LEAKAGE CURRENT (max.)	0.25mA / 240VAC
Protection	OVER LOAD	110 ~ 200% rated output power
	OVER LOAD	Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	110 ~ 140% rated output voltage
	OVER VOLTAGE	Protection type : Clamp by zener diode, output short
ENVIRONMENT	WORKING TEMP.	0 - +50℃
	WORKING HUMIDITY	20% ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 - +85℃,5 to 95% RH
	TEMP. COEFFICIENT	0.03% /°C(0 ~ 40℃ )
	VIBRATION	10-500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	EN-60950-1 , IEC 60950-1 Approval
	WITHSTAND VOLTAGE	I/P-O/P:4242VDC
	ISOLATION RESISTANCE	I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH ℃
	EMC EMISSION	Compliance to EN55022 class B, EN61000-3-2,3, FCC part15 class B
	EMC IMMUNITY	Compliance to EN61000-3-2,3
OTHERS	MTBF	780Khrs min. MIL-HDBK-217F (25 )
	DIMENSION	46.040.023.0mm
	PACKING	60g/pc; 200pcs/carton
CONNECTOR	PLUG	1xUSB port
CONNECTOR	CABLE	See page 2 ; Other type available by customer requested
NOTE	1.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient. 2.DC voltage:The output voltage set at point measure by plug terminal&50% load 3.Ripple& noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Length of set up time is measured at first cold start.Turning ON/OFF the power supply may lead to increase of the set up time 7.Derating may be needed under low input voltage.Please check the derating curve for more details. 8.The power supply is considered as an independent unit,but the final equipment still need to re-confirm that the whole system complies with the EMC directives.For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”